Help Information
Select a tab above to configure your FlushWRT smart toilet.
Note: Changes will not take effect until you click "Save Settings".
Network & System Setup
| Local IP Address: | |
| Subnet Mask: | |
| Device Name: | |
| Auto-Flush Feature: | Enable Disable |
| Auto-Emergency Clog Release: | Enable Disable |
Wireless Network Setup
| Wireless Network Mode: | |
| Wireless Network Name (SSID): | |
| Wireless Channel: | |
| Wireless SSID Broadcast: | Enable Disable |
Wireless Security
| Security Mode: | |
| Passphrase: |
WiFi Direct Fallback (AP Mode)
| Generate Fallback Network: | Enable Disable |
| Fallback SSID (Read Only): | |
| Fallback Passkey: |
Bidet Nozzle Configuration
| Water Pressure: | |
| Nozzle Z-Axis Offset: | |
| Spray Mode: | Steady Pulsate Oscillate |
Thermodynamics
| Temperature Scale: | Celsius (°C) Fahrenheit (°F) |
| Seat Target Temperature: | |
| Water Temperature: | |
| Eco-Schedule: | On Off |
Environmental Controls
| Exhaust Fan Speed: | |
| Night Light Color: | |
| Deodorizer Module: |
Health & Biometrics Logging
| Urinalysis Sensors: | Enable Disable |
| Seat Weight Tracking: | Enable Disable |
| Data Export Server (IP): | Port: |
Last Readings (Local Memory)
| Timestamp: | Today, 08:42:11 |
| Hydration Level: | Optimal |
| Ketones: | Negative |
| Estimated Weight: | 177.2 lbs (80.4 kg) |
Acoustic Privacy Settings
| System Volume: | |
| Privacy Masking Audio: | |
| Startup Chime: | Enable Disable |
| Button Beep Feedback: | Enable Disable |
Physical Hardware Controls
| Lid Auto-Open Proximity: | |
| Night-time Lid Lock: | Enable Disable |
Live Resource Draw
| Seat Heater: | 45.2 W (Active) |
| Water Heater: | 0.0 W (Idle) |
| System Idle Draw: | 4.2 W |
| Water Flow Rate: | 0.0 GPM (Idle) |
Billing Cycle Configuration
| Power Cycle Start Day: | Day of month |
| Water Cycle Start Day: | Day of month |
Cumulative Usage Statistics
| Metric | Past 24 Hours | Current Cycle |
| Total Power Consumption: | 0.8 kWh | 22.4 kWh |
| Bidet Water Usage: | 1.2 Gal (4.5 L) | 38.5 Gal (145.7 L) |
| Total Flush Volume: | 6.4 Gal (24.2 L) | 192.0 Gal (726.8 L) |
System Status & Logs
| System Uptime: | 14 days, 08:42:11 |
| Filter Status: | 88% Remaining |
Maintenance Actions
| Warning: Ensure seat is unoccupied before manual flush. | |
| Note: Lid will auto-close and lock for the 3-minute duration for safety. | |
| Note: Fill reservoir port A with FlushWRT Descaler or white vinegar before starting. Clears limescale. | |
| Note: Diagnoses supply lines. Alerts if a pressure drop is detected (possible leak). | |
| Warning: Stand back! High-pressure CO2 discharge. | |
| Warning: System will be unresponsive for ~2 minutes. | |
| Warning: Erases all IPs, schedules, and aim calibrations. |